Products
contact number
+86 02260639088
Welcome message order to contact us!
GO >>

Withdrawals Sleeve

Withdrawal sleeves can be used to mount bearings with a tapered bore on the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoul

details

Withdrawal sleeves can be used to mount bearings with a tapered bore on the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or end plates are not supplied with withdrawal sleeves. KM or HM lock nuts with appropriate locking devices are suitable, but must be ordered separately. To press the withdrawal sleeve into the bearing bore, a considerable amount of force is required to overcome the friction between the bearing, sleeve and shaft. To facilitate mounting and dismounting bearings on withdrawal sleeves, we recommends using a hydraulic nut.


Message Order
Welcome to contact us, we will contact you as soon as possible!
Products
捷邦国际贸易 版权所有 2017-2018 津ICP备14005797号-2 Powered by MetInfo